ACL (Access Control Lists)

EDMONTON

  --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: no

Press RETURN to get started!

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname Edmonton

Edmonton(config)#int fa0/0

Edmonton(config-if)#ip add 172.16.10.1 255.255.255.0

Edmonton(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Edmonton(config-if)#exit

Edmonton(config)#int fa1/0

Edmonton(config-if)#ip add 172.16.20.1 255.255.255.0

Edmonton(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Edmonton(config-if)#exit

Edmonton(config)#int se2/0

Edmonton(config-if)#ip add 172.16.30.1 255.255.255.0

Edmonton(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Edmonton(config-if)#exit

Edmonton(config)#router eigrp 10

Edmonton(config-router)#network 172.16.10.0 0.0.0.255

Edmonton(config-router)#network 172.16.20.0 0.0.0.255

Edmonton(config-router)#network 172.16.30.0 0.0.0.255

Edmonton(config-router)#exit

Edmonton(config)#exit

%SYS-5-CONFIG_I: Configured from console by console

Edmonton#

EIGRP

PENGATURAN PADA PC

PC 0

IP ADDRESS                        :  172.16.1.2

SUBNET MASK                  : 255.255.255.0

DEFAULT GATEWAY        : 172.16.1.1

PC 1

IP ADDRESS                        :  192.168.2.2

SUBNET MASK                  :  255.255.255.0

DEFAULT GATEWAY        :  192.168.2.1

PC 2

IP ADDRESS                        :  192.168.1.2

SUBNET MASK                  :  255.255.255.0

DEFAULT GATEWAY        : 192.168.1.1

ROUTER STATIS

1. KONFIGURASI ROUTER

A. ROUTER 1

Router>enable

Router#conf igure terminal

Router(config)#int fa0/0

Router(config-if)#ip add 172.16.3.1 255.255.255.0

Router(config-if)#no shut

Router(config-if)#exit

Router(config)#int ser 2/0

Router(config-if)#ip add 172.16.2.1 255.255.255.0

Router(config-if)#no shut

Router(config-if)#exit

Pemberian Routing Table

Router(config)#ip route 192.168.0.0 255.255.252.0 ser2/0

Router(config)#ip route 172.16.1.0 255.255.255.0 ser2/0

tugas jarkom

Basic Router CLI Show Command
Perintah yang digunakan untuk menampilkan dan memeriksa status dari Router yang dibagi menjadi 4 kategori :
1.General Use
> Show running-config
> Show startup-config
> Show version